⚠️What is SPC? Meaning "Single -Point-Charging "
Through the charging hole on the headset, you can charge the "Quest 3 console" and the "battery headset" at the same time!
The Quest 3 console gives priority to charging to about 85%, and then switches to charging the SPC headset.
After the headset is charged to 80%, it is fully charged together with the host.
[Contents in the box]
SPC battery headband, detachable rear bracket and removable mask pad, wire clip, cleaning cloth and instructions.
【installation steps】
To attach the headset to the Quest 3 console, first attach the rear bracket to the headset and then remove the Quest 3 face mask. Next connect the headband connectors to the left and right arms of the device and make sure they are secure. Finally thread the top strap through the HMD's connector and reattach the mask. Adjust to the most comfortable position to re-enter the VR world.
【Three major advantages】
🌟Comfort
🌟Extend gaming time
🌟Charge the headband and Quest at the same time.
First of all, the comfort of the KIWI design SPC battery headband is much better than that of the original headband. Not only is it secure, it won't pinch your head or ears, and the battery's weight-balanced design is ideal. Secondly, you can get an extra two to three hours of playtime with this headset. Whether it is connected to a fully charged host or connected when a low battery warning occurs, the use time can be extended. Finally, the "SPC Single Point Charging System" means you can connect the USB-C cable on the battery to the Quest 3 console, then plug the power supply into the headset battery to charge at the same time. If both the console and the headset are out of power, you can charge them at the same time to save time. (Note: The Quest 3 console will give priority to charging to about 85%, and then charge the SPC headset. After the headset is charged to 80%, it will be fully charged with the console. It will take 7.5 hours for the SPC headset and the console to be fully charged.)
【product testing】
The author tested action, rhythm, static sitting and shooting games. No matter what game is played, the additional support of the KIWI SPC battery headband makes the user more comfortable and secure, and the weight ratio is very balanced.
🔋The actual measurement results of extended use time are as follows:
Fully charged status :
- Quest 3 enhances gaming: The headset lasts about two hours with the Quest fully charged.
- Non-enhanced gaming: Lasts about two and a half hours with Quest fully charged.
- Mixed Reality Gaming: Lasts about an hour and a half, with Quest fully charged.
- When the screen is projected: about two hours of gaming, about one hour and fifteen minutes of mixed reality, and the Quest is fully charged.
Battery warning status (battery is about 15%):
- Quest 3 enhanced gaming: The headband lasts about two hours, and the Quest battery is about 75%.
- Non-enhanced gaming: Lasts about two and a half hours, Quest battery is about 75%.
- Mixed reality game: lasts about one hour and fifteen minutes, Quest battery is about 70%.
- When the screen is projected: the game takes about two hours, and the Quest battery is about 75%; mixed reality takes about one hour, and the Quest battery is about 60%.
【evaluate】
So far, Kiwi Design’s SPC battery headset is the best headset I’ve ever used for the Quest 3. Due to the even weight distribution of the rear battery, it feels very comfortable. The integrated headband makes the look neater and more elegant. The best thing is that the "SPC system" can charge the Quest 3 console and the headset at the same time, making charging extremely convenient!
[Recommended combination]
RGB Magnetic Charging Stand Display Stand｜One-stop storage + charging⚡️Super convenient
-
source:
THE VR REALM
